9BSST FIVE CHANNEL POWER AMPLIFIER

6. Output binding posts

The RED binding post is connected to the amplifier output. Connect to this post the (+) terminal on the loudspeaker. The BLACK binding post is connected to signal ground. Connect to this post the (-) terminal on the loudspeaker.

When the polarity switch is set for 0 degrees (normal operation ) the output at the RED binding post is in phase with the input signal.

When the polarity switch is set for 180 degrees (inverted operation) the the output at the RED binding post is 180 degrees out of phase with the input signal.

The Output binding posts provide three different interconnect options. Combinations may be used when bi-wiring. See fig- ure 2 below. Cables should be kept as short as practical and should never be terminated with connectors that may become confused for AC power connectors. Cables should be dressed away from input and power cables.

1. Banana plugs offer a quick disconnect option. Before inserting a banana plug into the binding post be sure to tighten the post nut to avoid rattling and to provide full insertion of the banana plug. Gold plated locking banana plugs are available from Bryston.

2. Spade lugs provide high contact area and secure fastening. Lugs should be gold plated. See diagram for details. Post diameter is 5/16’ ( 8mm ),lug width 5/8” (16 mm). Gold plated spade lugs are available from Bryston.

3. Stripped bare wire up to 3 gauge can be inserted through the hole in the binding post and held in place by tightening the post knob. Additional tightening pressure can be achieved using the wrench provided in the slots of the knob. Do not over tighten or the binding post may become damaged. Note that copper wire is malleable and may require further tightening after the initial installation.

Spade lug dimensions

5/16”

5/8”

Fig 2

2

3

1

wrench or coin

3

Page 4 Page 6
Page 5
Image 5
Bryston 9BSST owner manual Output binding posts
Page 4 Page 6

9BSST specifications

The Bryston 9BSST is a revered powerhouse in the realm of high-end audio amplification, offering audiophiles an unmatched listening experience through its impressive technical specifications and robust build quality. Esteemed for its pure, accurate sound reproduction, the 9BSST serves as a benchmark for solid-state amplifiers.

One of the standout features of the Bryston 9BSST is its power output, delivering 300 watts per channel into 8 ohms and 500 watts into 4 ohms, making it versatile enough to drive a wide array of loudspeakers. This substantial power ensures that even the most demanding speakers are adequately supported, capable of producing deep, thunderous bass alongside pristine high frequencies.

The amplifier is constructed with Bryston's legendary attention to detail and durability. Its all-steel chassis not only provides a rigid structure but also helps in minimizing electromagnetic interference, contributing to the overall audio purity. The 9BSST is also known for its warm, transparent sound signature, which can be attributed to its well-engineered Class AB topology. This design strikes an excellent balance between delivering high power and maintaining low distortion levels.

Moreover, the 9BSST incorporates advanced thermal management systems, including large heat sinks and robust cooling fans, ensuring reliable performance during extended listening sessions. This prevents overheating, which can adversely affect performance and longevity. In terms of connectivity, the amplifier comes equipped with balanced XLR and unbalanced RCA inputs, providing flexibility in system integration.

Bryston amplifiers are also recognized for their longevity, a feature reinforced by their impressive 20-year warranty. This commitment to quality is indicative of the brand’s confidence in their products. In addition, the 9BSST includes Bryston's unique "low-frequency cutoff" feature, which protects speakers from potential damage caused by high power surges at lower frequencies.

Overall, the Bryston 9BSST encapsulates the perfect synergy of power, precision, and reliability. Its robust engineering and exceptional sound quality make it a favorite among audiophiles and music professionals alike, solidifying its status as a top-tier choice in the high-end amplifier market. With its rich history and dedication to performance, Bryston continues to set the standard for high fidelity audio.
Top Page Image Contents