9BSST FIVE CHANNEL POWER AMPLIFIER
Rack Mounting Instructions
The 9BSST 19” version may be rack mounted with or without the ability to remove the channels. If removal of the chan- nels is desired then the shipping screws securing the channels need to be removed.
REMOVE 4
FROM THIS
SIDE
REMOVE ALL
SCREWS ON THE
TOP
DO NOT REMOVE
SCREWS FROM
RACK MOUNT
BRACKET
REMOVE 3
FROM THIS SIDE
TOP VIEW
Removing the channels makes rack mounting far easier as the chassis will be much lighter. Before removing any screws from the 9BSST be sure the power cord is removed from the unit. Remove the screws indicated on the top and bottom views plus the ones described on the sides.Pull gently on the channel handle to remove the chan- nel. Be prepared to use both hands to handle the channel. It should not be necessary to remove the power input module.Install 9BSST chassis in rack. Carefully reinstall the channels.
DO NOT REMOVE SCREWS FROM
RACK MOUNT BRACKET
BOTTOM VIEW
REMOVE ALL 6-32 SCREWS ON
THE BOTTOM.
The removal of the feet should not be necessary as clearance below the amplifier MUST be at least 1U when rack mounting.
6
