MPS2 POWER SUPPLY
REMOTE TRIGGER OUTput PINS
A 12Vdc signal will be present on the OUT pins of the Remote Trigger Connector whenever the MPS2 is activated. This control signal can be used to operate other equipment with suitable remote control inputs, such as Bryston SST series power amps.
SWITCHED TRIGGER OUTPUTS
Whenever a BP26, which is connected to one of the 4 MPS2 outputs, is turned on and NOT muted, a control sig- nal of 12Vdc will be present on the respecitve SWITCHED TRIGGER OUTPUT pins of the of the MPS2 power sup- ply. This control signal can be used to turn on suitably equipped amplifiers and other equipment.
POWER SUPPLY CORD
Use only power sup- ply cords supplied by Bryston Ltd. to connect the MPS2 power supply to other Bryston equip- ment. The MPS2 is not intended to operate any equipment other than specifically designated Bryston preamps, cross- overs and other audio processors.
