BT manual Installing Your Converse 120, See ‘Wall-mounting’

Installing

your
Converse	120

Plug your Converse	Your Converse 120
120 into the phone
	is now ready for
socket

making and receiving calls.

Situating your

Converse 120

Situate your Converse 120 close enough to a phone socket so that the cables will reach.

Do not stand it on carpets or other similar surfaces that generate fibres.

Your Converse 120 can be wall-mounted.

See ‘Wall-mounting’.

Warning

Your Converse 120 is only designed to be operated in a normal office or domestic environment.

It should not be used in bathrooms or near water.

Check your telephone

wall socket

If you do not have a modern style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.

Check the

dialling mode

P

T

TB

MODE

Use the dialling mode switch on the underside of your Converse 120.

Your Converse 120 should be pre-set to TB which gives you Tone dialling. This ensures the phone will work with all modern digital exchanges.

If your phone does not work, try setting the dialling mode to P.

If you are connecting to a switchboard, check with your switchboard operator or communications manager which dialling mode you need.

Your Converse 120 is approved for all compatible switchboards. If you would like a list of compatible switchboards, please contact BT on Freefone 0800 800 154.

Using

your

Converse 120

Emergency calls

The emergency services can

be contacted by dialling 999

or 112.

If your Converse 120 is connected to a switchboard or PBX, you might have to dial another number before 999 112 in order to get an outside line. On some switchboards, you may not be able to get an outside line if the power fails. Check with your switchboard operator or communications manager.

To make a call

1Lift the handset off the base.

2Dial the number you want.

At the end of your call, replace the handset.

2