Help
No dialling tone
Is the line cord plugged into the telephone socket?
Nothing happens
when you dial
Check that the dialling mode switch is set to the correct position.
The handset does
not ring
Is the ringer volume set to OFF?
You may have too many phones, fax machines and/or answering machines plugged in which might be overloading the sockets. (See ÔRinger Equivalence NumberÕ, back page).
Wall-
mounting
Your Converse 120 can be
Before you
•the wall can support the weight of the phone;
•the position you choose leaves sufficient space so that the phone is clear of any obstruction on the wall, such as a shelf or cupboard.
1Unclip the stand on the back of the Converse 120.
2Drill two holes in the wall 61mm vertically apart using an 8mm drill bit.
WALL PLUG SCREW
WALL | 61mm |
Insert the wall plugs if
3necessary, then insert the screws leaving about
5mm protruding from the wall on which to hang the phone.
4Rotate the handset hook 180˚ so that it protrudes upward. This holds the handset in place when wall mounted.
5Hang the holes on the back of the phone over the screwheads and gently pull the phone downward to make sure it is securely in place.
6Hang the handset on the handset hook.
4
