1Press and hold the MEMO button. Your Response 15 will beep.
skip
Beep!
To use call | To cancel any |
screening | procedure |
play
memo
2Speak clearly into the
microphone
3When you have completed your memo, release the
PLAY/MEMO/SKIP ♣ button. Your Response 15 will beep again.
Your memo is now stored and can be played back later.
Your Response 15 stores memos and treats them in the same way as incoming messages.
To play back, delete or skip forward or backward through memos follow the instructions for playing back messages (pages 12 and 13).
Your Response 15 can answer an incoming call for you, allowing you to identify the caller and decide whether to take the call.
1Make sure that the volume is set to an audible level. (See ÔTo set the volumeÕ, page 8)
2Allow the incoming call to be answered by your Response 15 as normal. You will hear the caller begin to leave a message.
3If you decide to take the call, lift the handset and you can speak to the caller. Recording will stop automatically.
If, when you lift the telephone handset, your Response 15 does not stop recording, either replace the handset and lift again, or press the STOP button.
Pressing the STOP button will cancel any procedure currently in progress.
stop
After pressing the button your Response 15 will return to ‘answer on’ mode.
messages | battery |
| low |
|
|
15
