Note
The symbol on your handset display indicates
when you are in range of the base station. If the
symbol disappears you are out of range and will
need to move closer to the base station.
Please note that this product does not have
autotalk standby. To end a call you must press the
RED PHONEbutton, you cannot just replace the
handset on the base station.
12
On-Air 2000 Executive ~ 3rd Edition ~ 2nd August ’02 ~ 4744
Using the BT On-Air 2000Executive handsetPress the GREEN PHONEbutton.
The display shows the symbol.
Dial the number.
Preparatory dialling
First enter the number to be dialled.
The number is shown in the display. (If you
make a mistake press Cto remove the
incorrect digit).
If you have entered the number correctly,
press the GREEN PHONEbutton to dial the
number.
Your handset will automatically time the durationof
all external calls. The handset display shows the call
duration both during your call and for one second
after it is complete.
Press and holdthe GREEN PHONE button
until after the display check sequence has
happened and only the battery icon is
displayed.
If you release the button before this has
happened, the handset will remain switched
off.
Press and holdthe RED PHONE button to
switch the handset off.
Call timer
Press the RED PHONEbutton.
To switch the handset power on and off
Press the GREEN PHONEbutton to answer
the call.
You can adjust the volume during a call and
whilst using the phone on handsfree.
Press the button to increase the
volume.
Press the button to decrease the
volume.
The display shows the current volume level.