To change numbers stored in the memory
To change phone numbers stored in the memory, simply repeat the process of storing the original numbers but enter the new number. The number stored in that location is automatically replaced by the new number.
To store a pause in
the memory
With some switchboards, after dialling the access code you may have to wait for a moment while the switchboard picks up an outside line. If so, you can insert a pause into the number to allow for this delay.
A pause can also be stored as part of a number in the memory.
When storing a phone number in the Quickdial memories:
1Enter the first part of the phone number (the access code) which gives you an outside line.
2Now enter a pause by pressing the REDIAL button.
Redial
3Enter the remaining part of the phone number.
The phone number is dialled automatically with a pause of around one second inserted.
Using the
RECALL button
Recall
This button signals a time break recall. If you are connected to a PBX (Private Branch Exchange), contact your PBX supplier for further information. The recall button is also used for BT Select Services.
Wall-
mounting
Your Decor 200 can be
Before you wall-mount your Decor 200, check that:
•the wall can support the weight of the phone;
•the position you choose leaves sufficient space so that the phone is clear of any obstruction on the wall, such as a shelf or cupboard.
1Drill two holes for the screws 73mm vertically apart. Insert the wall plugs provided (if required).
WALL PLUG | SCREW |
WALL | 73mm |
2Drive the screws into the wall, leaving about 4mm free on which to hang the phone.
3Press the phone line cable into the channel on the bottom of the phone, so that the phone lies flat against the wall.
4Hang the holes on the back of the phone over the screwheads and gently pull the phone downward to make sure it is securely in place.
5Rotate the handset hook 180°, so that you can hang up the handset when the phone is wall- mounted.
4
