Installing | into the telephone wall |
| 3 Plug your Decor 200 |
your Decor | socket |
| |
200 |
|
2 Dial the number you |
require. The display |
shows the number dialled. |
To end the call, replace |
the handset. |
1Situating your Decor 200
Situate your Decor 200 close enough to a phone socket so that the cables will reach.
Do not stand it on carpets or other similar surfaces that generate fibres.
Do not cover or enclose the machine; allow a free flow of air to its surfaces.
Your Decor 200 can be
Warning
Your Decor 200 is only designed to be operated in a normal office or domestic environment.
It should not be used in bathrooms or near water.
2 Check your telephone
wall socket
4Set the ringer volume
HI
LO
The ringer volume switch is located on the underside of your Decor 200 and effects the volume at which your phone rings.
There are two settings:
HI
A loud ring; your Decor 200 is preset to this position.
LOW
A quiet ring.
Your Decor 200 is now ready for use.
Using your 
Decor 200
To receive a call
1When the phone rings pick up the handset and speak.
To redial the last
number dialled
1Lift the handset.
2Press the REDIAL button.
Redial
The phone will automatically dial the last number dialled.
To store phone
numbers in the ‘one-
touch’ memory
Your Decor 200 has three
M1
M2
M3
You can store a number on each of these buttons
If you do not have a modern style socket, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct socket. This is a chargeable service.
To make a call
1Lift the handset and listen for a dialling tone. Display shows:
and dial the number by pressing just one button; so there is no need to dial all the digits every time.
To store numbers in the memory you use the
2
