Using your Snack Heroes™ Chocolate Fountain
1.Turn the chocolate fountain to the ‘off’ dial setting.
2.Plug the unit into a
Note: Place the chocolate fountain on a flat level bench.
3.Turn the dial to the ‘warm up’ function to allow the base to warm up for 5 minutes.
4.Melt chocolate according to directions on page 7.
5.Pour the melted chocolate mixture into the base of the fountain and switch the dial to ‘choc flow’ to start the chocolate fountain flow. See figure 4.
Note: To operate the chocolate fountain, the chocolate must always be in liquid form.
6.Allow the chocolate fountain to flow for at least 5 minutes before adding extra oil.
Note: If the mixture is not flowing correctly see troubleshooting on page 9.
Do not leave chocolate in the fountain overnight in the ‘warm up’ setting. This setting is not a high enough temperature to keep the chocolate from hardening.
Figure 4
6
