BT 2110 manual Fitting the belt-clip, Connect the telephone line cord

Synergy 2110 - Edition 5 – 23rd October ’00 (3375)

SETTING UP

4Fitting the belt-clip

Attach the belt-clip to the handset.

Connect the telephone line cord

5to the Synergy2110base station

Plug the line cord into the line socket on your Synergy base station.

Please note

Do not connect the telephone line cord to the phone socket until your handset batteries are fully charged. This will prevent the risk of the phone being answered before batteries are charged, which may prevent them from reaching maximum capacity.

6Connect the telephone line cord

If you do not have modern phone sockets, call Freefone 0800 800 150 and ask for a BT engineer to come and fit the correct type. This is a chargeable service.

Your Synergy is now ready for use.

Pre-set PINs

Your Synergy 2110 comes with a pre-set PIN which you will need to use to perform various functions on your phone.

When you enter your base station PIN, the display will not show it for security reasons.

Base station PIN is 0000 – used when adjusting base station settings and registration of new handsets.

Customer Helpline

If you experience any difficulties in installing your Synergy 2110 please contact the Helpline on 0845 602 1041. The Helpline is open 9am-5.30pm Mon-Fri.

10