BT Converse 425 ~ Issue 3 ~ 2nd Edition ~ 23rd July ’03 ~ 5528

To store a name and number in the directory

Press and hold the Directory button. Display shows STORE and EDIT.

STORE will be flashing.

Release the Directory button.

Press the button.

Display shows the number of entries stored in the directory, followed by ENTER NUMBER.

Note

If you try to add a new entry and the directory is full, the display shows MEMORY FULL.

To continue, follow steps shown in ‘To edit an entry in the directory’ or ‘To delete an entry in the directory’.

Enter the number you want using the keypad. Alternatively, turn the Navigator Wheel until the digit you want is displayed then press the button. Repeat this step until the full telephone number is entered.

Press and hold the button until the display shows

ENTER NAME.

Enter the letters you want using the keypad. Alternatively, turn the Navigator Wheel to display the letter required then press the button.

Press and hold the button until the display shows STORE and EDIT.

Note

You can stop during any set of steps and return to standby by lifting the handset or pressing the Handsfree button.

You can now enter another name and number.

To edit an entry in the directory

Press and hold the Directory button. Display shows STORE and EDIT.

Release the Directory button.

Turn the Navigator Wheel so that EDIT is flashing.

Press the button.

Turn the Navigator Wheel to display the entry you want to change.

Press the button. The cursor flashes under the first digit of the number. If you need to move the cursor, either press the

button or the Next  button to go forward or the  Clear button to delete a digit.

USING

11

Page 12
Image 12
BT 425 manual To store a name and number in the directory, To edit an entry in the directory