BT Diverse 5210 ~ 6th Edition ~ 16th May ’03 ~ 5185
To answer a call in handsfree
When the phone rings:
To store an entry in the directory
Press the HANDSFREE button. The call is transferred to the loudspeaker.
To switch to handsfree during a call
During a call you can switch to handsfree mode:
Press the HANDSFREE button. The call is transferred to the loudspeaker.
Press the GREEN PHONE button to switch back to using the handset.
Note
If you need to replace the handset in the base station during a call, for
example, because the battery is flat, hold down the HANDSFREE button.
Using the directory
You can store up to 50 names and numbers in the telephone directory. You can enter up to 32 digits and up to 16 characters.
MENU
OK
OK
8 TUV
6MNO
6MNO
MENU
OK
Press the DIRECTORY button.
Press the MENU options button. Display shows New Entry.
Press the OK options button.
Enter the telephone number.
Press the OK options button to enter the name.
Enter the name.
Entering names:
Enter the name using the letters on the keypad. For example, to enter the name TOM:
Press the 8 button, T appears on the display.
Press the 6 button three times until the display shows O.
Then press the 6 button to display m.
For the full character map, see page 17.
Press the MENU options button. Display shows Save Entry.
Press the OK options button to confirm.
Press the RED PHONE button until you reach the idle display.
USING
BT Diverse Helpline – 08457 908 070
16
