BT 5310 manual Using the directory, To switch to handsfree during a call, Entry

BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191

To answer a call in handsfree

To store an entry in the directory

➤ ➤

When the phone rings:

Press the HANDSFREE button. The call is transferred to the loudspeaker.

		Press the DIRECTORY button.
MENU		Press the MENU options button.
		Display shows New Entry.
	OK	Press the OK options button.
		Enter the telephone number.

To switch to handsfree during a call

OK Press the OK options button to

enter the name.

Enter the name.

USING

➤ ➤

During a call you can switch to handsfree mode:

Press the HANDSFREE button. The call is transferred to the loudspeaker.

Press the GREEN PHONE button to switch back to using the handset.

Note

	Entering names:
	Enter the name using the letters
	on the keypad. For example, to
	enter the name TOM:
8 tuv	Press the 8 button, T appears
	on the display.
6 mno	Press the 6 button three times
	until the display shows O.
6 mno	Then press the 6 button to
	display m.

If you need to replace the handset in the base station during a call, for

example, because the battery is flat, hold down the HANDSFREE button.

Using the directory

You can store up to 100 names and numbers in the telephone directory. You can enter up to 32 digits and up to 16 characters.

	For the full character map,
	see page 17.
MENU	Press the MENU options
	button. Display shows Save
	Entry.
OK	Press the OK options button
	to confirm.
	Press the RED PHONE button
	until you reach the idle display.

BT Diverse Helpline – 08457 908 070

16