BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191
Alarm clock
You can use your handset as an alarm clock. You must set the date and time before the alarm will work. The alarm will ring daily until the setting is turned off.
Note
The alarm will only sound if the handset is in idle mode. The alarm will not sound if the Room Monitor function is being used.
To set the alarm
Press the ALARM CLOCK options button.
Display shows Alarm Clock.
OK Press the OK options button.
Display shows Enter alarm time and the first digit of the time will be flashing.
Enter the time you want the alarm to go off at.
OK Press the OK options button.
Use the UP/DOWN navigation button to select am/pm if in 12 hour mode.
OK Press the OK options button.
Display shows Entry Saved.
Press the RED PHONE button until you reach the idle display.
The 
icon will be displayed in the top right of the handset display to indicate that the alarm has been set.
To stop the alarm ringing
When the alarm goes off it sounds like an incoming call and lasts for about 30 seconds. The display will also show
< < < Alarm Clock > > > flashing.
Press any button to switch the alarm off.
To cancel the alarm setting
The alarm will ring daily until you cancel the setting.
Press the ALARM CLOCK options button.
Display shows Alarm Clock
with a 
above the OK options button.
OK Press the OK options button.
You will hear a tone and the
will disappear. Press the RED PHONE button until you
reach the idle display.
The 
icon will have disappeared from the top of the handset display.
HANDSET SETTINGS
BT Diverse Helpline – 08457 908 070
35
