BT Diverse 5310 ~ 5th Edition ~ 11th June ’03 ~ 5191

HANDSET SETTINGS

Enter an available number. If the number is already assigned to another handset you hear a beep. Select another number.

If required, press the UP or DOWN navigation button to select another handset and use the Keypad to change the number.

OK Press the OK options button to confirm.

Press the RED PHONE button until you reach the idle display.

Walk and talk

If you have more than one Diverse 5000 handset then you can use the walk and talk mode. This allows two handsets to communicate with each other outside the range of the base station. When they are out of range, however, they cannot receive external calls. The maximum range between the communicating handsets is 300 metres outdoors in ideal conditions. Please note that batteries are used more quickly in walk and talk mode.

Communication between two handsets is possible when:

Both handsets are registered to the same base and have currently selected that base.

The handsets are registered to different bases but are both set to Best Base.

One of the handsets is not registered and the other handset is registered as Best Base.

Neither handset is registered.

To switch walk and talk mode on and off

To switch walk and talk on:

MENU Press the MENU options button.

Press the DOWN navigation button until the display shows Additional Features.

OK Press the OK options button.

Display shows Room Monitor.

Press the DOWN navigation button until the display shows Walk and Talk.

OK Press the OK options button.

You will hear a tone and the display will show Walk and Talk.

To switch walk and talk off:

MENU Press the MENU options button.

Display shows Walk and Talk

Off.

OK Press the OK options button.

The display will return to the idle screen.

BT Diverse Helpline – 08457 908 070

40

Page 42
Image 42
BT 5310 manual Walk and talk, To switch walk and talk mode on and off, Off