BT Big Button 100 manual Number memory

BT Big Button 100 – Issue 2 – Edition 1 – 10.02.06 – 6361

10 Number memory 17

You can use the - buttons on the keypad to store and dial a total of 10 phone numbers. Each stored phone number can be up to 32 digits long.

Store a number in the 10 number memory

Remove the one-touch number memory label to reveal the Store button.

1.Lift the handset or press Handsfree .

2.Press Store .

3.Press the - button you want to use as the memory location.

4.Enter the phone number you want (up to 32 digits).

5.Press Store to confirm. You hear a confirmation beep. The number is stored.

Dial a number in the 10 number memory

1. Lift the handset or press Handsfree .

You can make a note of your memory numbers on the label underneath the handset. There is also an enlarged label at the back of this guide if you prefer.

To cancel storing a number, replace the handset.

You may hear an exchange announcement, during or after the storing sequence, suggesting that there has been an error, or that you should redial the number. This is normal and does not mean that the storing sequence is in error.

2.Press Memory then press the - button you want. The stored phone number is dialled.