BT DECTfax manual To change a stored number

Using your handset

Alternatively you can use the ▲ or ▼ button to scroll through the two-digit numbers.

3Enter the telephone number you want to store using the keypad. Press the Clr button to delete incorrectly entered digits.

If you are on a PABX exchange (switchboard) you may need to have a pause in the stored number. Use the R button for this. The pause is shown on the display as .

4Then press OK to confirm the entry. The handset beeps and displays the stored number. The handset returns to standby after about 20 or 30 seconds, or you can use the Clr button to return to standby immediately.

To change a stored number

1Press the ▲ or the ▼ button.

2Enter the two-digit memory number or scroll through the stored numbers until you reach the phone number you require.

17