BT Freestyle 310 - page 43

43Base settings
BT Freestyle 310 – Issue 2 – Edition 01 – 08.01.06 – 7971
If you experience any problems, please call the Helpline on 0870 240 3962or email bt.helpdesk@vtecheurope.com
Dial mode
Your BT Freestyle 310 is pre-set to Tone (DTMF) dialing.
If required, you can change this setting to Pulse dialing.
1. Press Menu.Scroll to Settings menu and press OK.
2. Scroll to
Setup base and press OK.
3. Scroll to
Dial mode and press OK.
4. Scroll or to highlight
Tone or Pulse ,then press OK.
5. Press to return to standby.
Recall mode
The (Recall) button is used with some network and
PBX switchboard services.
1. Press Menu.Scroll to Settings menu and press OK.
2. Scroll to
Setup base and press OK.
3. Scroll to
Recall mode and press OK.
4. Scroll or to highlight
Timed break or Earth ,then
press OK.
5. Press toreturn to standby.
IMPORTANT
You should only change this setting
if advised to do so.
IMPORTANT
You should only change this setting
if advised to do so.