8474 Studio 3100 UG Iss2 [2] 25/10/07 16:38 Page 33
BT Studio 3100 – Issue 2 – Edition 2 – 25.10.07 – 8474
Additional handsets and bases | 33 | |
|
|
|
Up to 5 handsets can be registered and operated from the BT Studio 3100 base.
Each handset can be registered with up to four bases.
If you buy new handsets to use with your BT Studio 3100 they will have to be registered to the base before you can use them.
Register a new BT Studio 3100 handset to your BT Studio 3100 base
1.At the base: Press and hold 
for 3 seconds until you hear two beeps. You now have 90 seconds to register the handset.
2.At the handset: press 
, scroll 
to REGISTER and press 
.
3.Scroll 
to REG BASE and press 
.
4.Enter the base number
5.The display will show SEARCHING...1 When the handset finds the base signal, the SEARCHING and base identification number is displayed.
6.The display will ask for the PIN to be entered. Enter the PIN
(the default setting: 0000) and press
to confirm. You will hear a beep. The handset is now registered.
Please note
Handsets that were supplied with your BT Studio 3100 base are already registered to it as
Each additional handset you buy must be registered with the base.
IMPORTANT
Before registration, make sure the handset batteries are fully charged and that you are close to the base.
If you experience any problems, please call the Helpline on 0870 605 8047 or email bt.helpdesk@suncorptech.com
