BT XH 2100 manual To automatically insert a pause after an access code

BT Freelance XH 2100 user guide ~ 2nd Edition ~ 18th March ’04 ~ 6012

GENERAL INFORMATION

To automatically insert a pause after an access code

With some switchboards it may be helpful to dial a pause after entering the switchboard access code, e.g. 9, 11 etc. to enable you to get an outside line.

This feature automatically inserts a pause between the access code and the telephone number that you have entered in the Phonebook. However for this feature to work you must still enter the access code at the front of the telephone number when storing in the Phonebook.

Menu		Press the  button to enter
		the menu.
C	 Use the DOWN button to
a		scroll to SETUP.
l
ls
Menu		Press the  button.

Use the DOWN button to

C		scroll to PABX.
a
l
ls
Menu		Press the  button.
a		Use the	DOWN		button to
C
l		scroll to PBX		1.
ls
Menu		Press the  button.
		Display shows PIN?.
		Enter PIN number.
Menu		Press the  button.

Enter the access code.

Menu

Menu
C	
a
l
ls
Menu
C	
a
l
ls
Menu
C	
a
l
ls
C	
a
l
ls
Menu

Press the  button.

You can also adjust the length of the pause to be inserted. There are two options available, 3 or 5 seconds to be set to suit the switchboard:

Press the  button.

Use the DOWN button to scroll to SETUP.

Press the  button.

Use the DOWN button to scroll to PABX.

Press the  button.

Use the DOWN button to scroll to PAUSE.

Display shows 3 SEC.

Use the DOWN button to scroll to 5 SEC.

Press the  button. You will hear a confirmation tone.

36