Step 2: Check your Connection
Check the LINK/ACT light on the front of the LinkStation. If it is lit, then LinkStation is connected properly; please turn to Page 4 to continue setup. If it is not lit, continue to the next step.
Verify that the LINK/ACT light on the front of LinkStation is lit (see Step 4’s picture). If it is lit, turn to Page 4 to contintue setting up LinkStation. If the LINK/ACT light is still not lit, please verify the following:
Both LinkStation and the hub, switch, or PC are powered on. 
The Ethernet Cable is securely fastened to both devices.
If problems persist, contact our 24/7 technical support at
(866)
3
