The Ethernet Converter Manager will search for all Buffalo Ethernet Converters on your network. The process usually takes less than one minute. Once completed, the Search Results window will appear.
Search Results will list all Buffalo Ethernet Converters on the network. If there is more than one Ethernet Converter in the list, select the one you would like to configure. Press the IP Settings button to continue configuration.
The IP Address Setup window will open. Check the box next to Use DHCP and press the OK button. The Ethernet Converter will reboot; this process may take as long as a minute. The Ethernet Converter Manager will then
NOTE: If you want to give your Ethernet Converter a static IP address, than you can skip checking Use DHCP and enter your own IP Address and Subnet mask in the cooresponding fields. If using a static IP address, it is recommended to pick one inside your existing network's subnet.
