Buffalo Technology WZR2-G300N setup guide Aoss

AOSS

AOSS (AirStation One-Touch Secure System) is a simple system for configuring your wireless network securely. If your router and your client device are installed and both support AOSS, then making a secure wireless connection between them is simple.

A. Push the AOSS button on the top of your router and hold it in for a few seconds. The AOSS light will begin to flash amber.

B. You now have two minutes to push the AOSS button on your client device and finish the connection. If your client device is a PC card, CardBus, USB, or PCI adapter, the AOSS button will probably be in its Client Manager Software. Check your client device’s AOSS setup information for instructions on where to push or click the AOSS button.

After you’ve pressed both buttons, it will take about 30 seconds for the connection to complete. When it’s finished, the AOSS light will glow a solid amber, without blinking. You now have a secure network connection!

Notes: If your client devices do not support AOSS, or you don’t want to use it, turn to page 5.

Only one AOSS wireless client adapter can be configured with the AOSS router at a time. The buttons will need to be re-pressed to connect each additional AOSS wireless client adapter.

Additional non-AOSS wireless devices can be connected to your wireless network by connecting them manually. The encryption information is available in the AirStation Web Configuration Utility in the AOSS section. Please consult the User Manual on the AirStation CD-ROM for more information.

After you push the first AOSS button, you have 2 minutes to push the second AOSS button. If you run out of time, just push the first AOSS button again.