Bunn A10 specifications Routine Cleaning, Handle Maintenance, Deliming, Water Quality

Models: A10

1 15
Download 15 pages 46.12 Kb
Page 12
Image 12
ROUTINE CLEANING

ROUTINE CLEANING

Rinsing the brew funnel and decanter after each use is the only routine cleaning required. Occasionally, wipe the outside of the brewer including the area above the funnel with a damp cloth. (The brew funnel, hot water funnel and decanter are top rack dishwasher safe.)

HANDLE MAINTENANCE

P2083

Using a phillips screw driver, periodically tighten the screw in the handle.

DELIMING

Periodically, you should delime the brewer to clear any deposits that may have accumulated due to impurities in the water source.

1)

Unscrew the sprayhead with your fingertips and set

 

 

it aside.

 

2)

Insert all but two inches of the flexible deliming spring

 

 

probe (supplied) through the sprayhead opening.

 

3)

Slide the tool in and out five or six times to loosen

 

 

mineral deposits collected in the sprayhead tube.

P2084

 

 

 

Remove it and set it aside.

 

4)

Check the holes in the sprayhead for mineral deposits.

 

 

These may be cleared by using a toothpick. Rinse the

 

 

sprayhead with water before reinstalling.

 

5)

Plug in the brewer and allow the water in the tank

 

 

to reheat before using the brewer. The frequency

 

 

of deliming depends on the mineral content of your

 

 

water.

P2085

 

 

SOFTENED WATER and/or DECAFFEINATED COFFEE

Bunn® coffee brewers will brew a perfect decanter of coffee when used with unsoftened tap water and regular coffee. If there’s a noticeable difference when us- ing softened water and/or decaffeinated coffee, telephone or write us to request a special sprayhead and use a coarser grind of coffee.

WATER QUALITY

Install a water conditioner if your water contains excessive amounts of sediment, taste, or odors.

12

43422.1 010311

 

Page 12
Image 12
Bunn A10 Routine Cleaning, Handle Maintenance, Deliming, Water Quality, SOFTENED WATER and/or DECAFFEINATED COFFEE