BUNNEspress®
USER NOTICES
Model ES•1AF
The notices on this brewer should be kept in good condition. Replace unreadable or damaged labels.
This equipment is to be installed to
comply with the Basic Plumbing Code of
the Building Officials and Code
Administrators International, Inc. (BOCA) and the Food Service Sanitation Manual of the Food and Drug Administration (FDA).
00656.0000
CAUTION
HOT
24246.0000
WARNING
•DO NOT OVERLOAD CIRCUIT.
•ALWAYS ELECTRICALLY GROUND THE CHASSIS OR ADAPTOR PLUG.
•DO NOT DEFORM PLUG OR CORD.
•FOLLOW NATIONAL AND LOCAL ELECTRICAL CODES.
•KEEP COMBUSTIBLES AWAY.
FAILURE TO COMPLY RISKS EQUIPMENT
DAMAGE, FIRE OR SHOCK HAZARD.
READ THE ENTIRE OPERATING MANUAL INCLUDING THE LIMIT OF WARRANTY AND LIABILITY BEFORE BUYING OR USING THIS PRODUCT
00986.0000C 3/94 © 1994
00986.0002
160 psig max operating pressure
24247.0000
Must wet
water before installing.
26625.0000
!WARNING
The milk supply hose and milk container must be refrigerated after use in compliance with state and local health codes.
26868.0000
F SM
26602.000026602.0001
WARNING
HAZARDOUS
VOLTAGE
UNPLUG BREWER
BEFORE REMOVING!
12652.0000
1.Place a pod in the filter holder.
2.Lock the filter holder into the group head.
3.Place an empty cup below the dispensing nozzles.
4.Press your drink selection.
5.Carefully remove the cup after the flow has stopped.
1.Place an empty cup below the dispensing nozzle.
2.Press the button indicating your selection.
3.Press any button to stop the cycle.
1. For complete instructions, see the operators manual.
When CLEAN FROTHER light flashes, rinse the frother as follows:
2.Place the end of the milk supply tube in a container of clean hot water.
3.Press the "CLEAN FROTHER" button.
4.Carefully remove the cup & discard contents after flow has stopped.
5.Disassemble and thoroughly clean the milk frother according to local sanitation codes, at least every four (4) hours.
226601.0000
25551.0001
3
(Revised January 1996)
