Bunn ICB, ICB-DV CALIBRATE FLOW? NO YES, BYPASS OZ/M: XX.X

Page 42
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
BYPASS OZ/M
This function allows the operator to view or to enter the
actual fl ow rate coming out of the bypass nozzle. This
is NOT used to calibrate the actual fl ow rate, but to tell
the internal controller how fast the water is fl owing.
Procedure to adjust the bypass fl ow rate setting:
1. Press and hold the right hidden button until the
display reads SET LANGUAGE. Press the right hid-
den button until the display reads BYPASS OZ/M.
The number represents what the brewer thinks is
the fl ow rate out of the bypass nozzle.
2. If the actual fl ow rate of the bypass is known but is
different than the number on the display, use the
(-) and (+) to enter the correct fl ow rate.
3. When fi nished, press and release DONE. This saves
the new setting and advances to the next function
screen, CALIBRATE FLOW. To exit programming
and return to the MAIN SCREEN, press and release
the ON/OFF pad. P3094
BREW
A
BREW
B
BREW
C
BREW
A
BREW
B
BREW
C
CALIBRATE FLOW?
NO YES
BYPASS OZ/M: XX.X
(-) DONE (+)
37077 091704