PROGRAMMING THE DISPENSER
The following function screens are in order of appearance. Each screen will have instructions on how to access, and the procedures to program the various functions of the dispenser. To enable programming, place the “NORMAL/PROGRAM/RINSE” switch in the “PROGRAM” position.
IMPORTANT PROGRAMMING NOTES - READ CAREFULLY
To exit the programming mode at any time, press and release the exit (center) pad located on the front switch panel. The display will return to the PROGRAM HOME SCREEN.
If none of the five programming switches are pressed within 90 seconds during the setup of the dispenser, the programming of the function screen that is being set will be exited and the display will return to the PRO-
GRAM HOME SCREEN.
PROGRAM HOME SCREEN
DISPENSE READY
BUNN iMIX
P3057
The screen above will be shown when the dispenser is ready for use. While the tank is heating, the water temperature will be displayed until the ready temperature is reached.
PROGRAMMING SWITCHES
Digital Beverage Control
E D C B A
A.Enter program mode and advance to next menu
B.Increment display value positive
C.Exit program mode
D.Increment display value negative
E.Return to previous menu
STOP
Digital Beverage Control
P3059
E D C B A
A.Enter program mode and advance to next menu
B.Increment display value positive
C.Exit program mode
D.Increment display value negative
E.Return to previous menu and interrupt dispense
SELF SERVE MODELS | PORTION CONTROL MODELS |
Using the
Programming of dispenser is achieved by entering a certain function, then, by use of programming switch- es, the operator can customize the dispensing process to their specifications.
To access the programming mode, and to scroll through different function screens, the programming switches shown are used. There are five of switches that will be used for setup of the dispenser.
10 | 37510 041207 |
