Bunn LCR-2C Canada, Dimensions & Specifications, Model, Product, Number, 1.8 oz, 2.5 oz, Type

Dimensions & Specifications									CANADA
Model	Product	Dispense Rate/Sec.		Connector	Volts	Amps	Heater	Capacity**	Cubic	Shipping	Cord
	Number	1.8 oz.	2.5 oz.*	Type			Watts		Feet	Weight	Attached
		Product Ratios
LCR-2C	34400.6044†	45:1-100:1		Scholle	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
			65:1-100:1
LCR-2C	34400.6045†	25:1-45:1	25:1-65:1	Scholle	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
LCR-2C	34400.6046†	45:1-100:1	65:1-100:1	LiquiBox QC/D II	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
LCR-2C	34400.6047†	25:1-45:1	25:1-65:1	LiquiBox QC/D II	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
	†All models can be changed to these electrical configurations.				208	25.8	4500	385 cups/hr.	10.9	114 lbs. (51.7 kg)	No
					240	25.8	6000	512 cups/hr.	10.9	114 lbs. (51.7 kg)	No
LCR-2C PC 36500.6044†		45:1-100:1	65:1-100:1	Scholle	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
LCR-2C PC 36500.6045†		25:1-45:1	25:1-65:1	Scholle	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
LCR-2C PC 36500.6046†		45:1-100:1	65:1-100:1	LiquiBox QC/D II	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
LCR-2C PC 36500.6047†		25:1-45:1	25:1-65:1	LiquiBox QC/D II	120	14.2	1500	125 cups/hr.	10.9	114 lbs. (51.7 kg)	Yes***
	†All models can be changed to these electrical configurations.				208	25.8	4500	385 cups/hr.	10.9	114 lbs. (51.7 kg)	No
					240	25.8	6000	512 cups/hr.	10.9	114 lbs. (51.7 kg)	No

*Unit shipped with dispense rate set at 1.8 oz./sec. Dispense rate increases to 2.5 oz./sec. if restrictor plug is removed.

**Capacity measured with a 5 oz. cup. ***Power cord (NEMA 5-20P) 20 Amp-120V machine only.

Electrical: 120V model requires 2-wires plus ground service rated 120V, single phase, 60 hz.

Plumbing: 20-90 psi (138-621 kPa) from a 3⁄8" (10 mm) or larger supply line. Unit requires a 2.2 gpm line flow capacity. A shut-off valve should be installed in the line before the unit. Install a regulator in line when pressure is greater than 90 psi to re- duce pressure to 50 psi. Supplied with 3⁄8" (10 mm) male flare fitting.

31.32

15.70 19.57

9.74

7.75

38.00

29.69

5.29

LCR-2 with portion control.

12.16

1.6

13.37

24.83

Bunn-O-Matic Corporation of Canada - 280 Industrial Pkwy. S. Aurora, Ontario L4G 3T9 • 905-841-2866 • Fax 905-841-2775 • www.bunn.com

BUNN® practices continuous product research and improvement. We reserve the right to change specifications and product design without notice. Such revisions do not entitle the buyer to corresponding changes, improvements, additions or replacements for previously purchased equipment.

All dimensions shown in inches. Bunn Corporation owns all copyrights relating to materials in this publication. Please contact Bunn Corporation to request permission to reproduce any portion of this publication.