FRAME ASSEMBLY
5.Press a Weight Tube Bumper (64) into the end of a Weight Tube (63). Insert the Weight Tube into the front stack of Weights (25). Be sure that the pins on the Weight Tube are sitting in the pin grooves in the top Weight.
Lubricate the inside of the holes in a Top Weight (65). Set the Top Weight onto the front stack of Weights (25). Insert both Long Weight Guides (62) into the stack of Weights.
Be sure that the holes in the Weight Guides are at the top, as shown.
6.Press a Weight Tube Bumper (64) into the end of the other Weight Tube (63). Insert the Weight Tube into the rear stack of Weights (25). Be sure that the pins on the Weight
Tube are sitting in the pin grooves in the top Weight.
Lubricate the inside of the holes in the other Top Weight (65). Set the Top Weight onto the rear stack of Weights (25). Insert both Short Weight Guides (73) into the stack of Weights.
Be sure that the holes in the Weight Guides are at the top, as shown.
6
5 |
|
Holes | 62 |
| |
Lubricate | 65 |
| |
| Pin |
63 | 64 |
| |
| 25 |
6 |
|
| Holes |
| 73 |
Lubricate |
|
65 | Pin |
| |
63 |
|
64 |
|
25 |
|
