SEAT ASSEMBLY
VKR ASSEMBLY
28. Press a 1 1/2Ó Inner Cap (32) into the Leg | 28 |
| |
Lever (29). | 36 | ||
| |||
Lubricate the 5/16Ó x 2 1/4Ó Bolt (33). Attach |
| 3 | |
the Leg Lever (29) to the Seat Frame (36) |
| ||
with the 5/16Ó x 2 1/4Ó Bolt and a 5/16Ó Nylon |
|
| |
Locknut (3). | 33ÑLubricate |
| |
Insert the 5/16Ó x 2Ó Eyebolt (35) into the Leg |
| 29 | |
Lever (29) from the direction shown. Tighten |
|
| |
a 5/16Ó Nylon Locknut (3) with a 5/16Ó Flat |
| 8 | |
Washer (8) onto the Eyebolt. | 35 | ||
| |||
|
| 3 | |
| 32 |
| |
29. Rest the Seat Frame (36) on the indicated pin | 29 |
| |
in the Front Upright (42). Attach the Seat |
| ||
42 | 40 | ||
Frame to the Front Upright with a 5/16Ó x |
| ||
2 3/4Ó Carriage Bolt (14) and the Seat Knob |
| 36 | |
(40). |
|
| |
| 14 |
| |
| Pin |
| |
30. Press two 3/4Ó Round Inner Caps (34) into | 30 | 34 | |
each 13 1/2Ó Pad Tube (28). | |||
| |||
Insert one 13 1/2Ó Pad Tube (28) into the | 36 |
| |
| 30 | ||
Seat Frame (36). Slide a 6Ó Pad (30) onto |
|
| |
each end of the Pad Tube. |
| 28 | |
|
| ||
Insert the other 13 1/2Ó Pad Tube (28) into the |
|
| |
Leg Lever (29). Slide a 6Ó Foam Pad (30) | 30 |
| |
onto each end of the Pad Tube. |
| ||
| 34 | ||
|
| ||
|
| 29 | |
31. Press 1 1/2Ó Inner Caps (32) into the ends of | 31 |
| |
the Left VKR Arm (79) and the Right VKR |
| ||
| 74 | ||
Arm (80). |
| ||
|
| ||
Attach the Left VKR Arm (79) and the Right | 75 |
| |
|
| ||
VKR Arm (80) to the VKR Upright (74) with |
|
| |
two 5/16Ó x 3Ó Bolts (75) and two 5/16Ó Nylon |
|
| |
Locknuts (3). |
| 79 | |
|
| ||
| 80 | 3 | |
| 32 |
|
14
