Bunn MCAA Periodic CLEANING/DESCALING, Will hold at least 414 ml 14 oz. of liquid, and press

ROUTINE CLEANING

Before beginning any cleaning procedure, unplug the brewer to avoid the accidental start of a brew cycle.

Clean the pod holder, drip tray and drip tray grate after each use, using a damp cloth and mild detergent and rinse. With the pod holder and drip tray removed, use a damp cloth with mild detergent to wipe the area below the pod holder and into the drip tray area. Occasionally, wipe the outside of the brewer with a damp cloth. (The reservoir, slide lid, pod holder, drip tray and drip tray grate are dishwasher safe.)

P2963

PERIODIC CLEANING/DESCALING

(Recommended At Least Once a Month.)

Periodically, you should clean and descale the brewer to clear any mineral deposits that may have accumulated due to impurities in the water source. If these deposits are not removed, they can impair the operation of the brewer and reduce the product life.

There are several products available specifically for descaling. We recommend using URNEX® Activated Descaler or JavaClean2 Cleaner and Descaler, available on our web site: www.bunn.com. (White vinegar can be used to descale if a descaling product is not available.)

Follow the directions as printed on the manufacturer’s package.

1)Fill the reservoir with descaling product as described by the manufacturer’s directions, or 946 ml (32 oz.) of white vinegar. Do not add powder mix

	directly to the reservoir. Descaling product must be mixed
	into a solution before it is added to the reservoir.
2)	Place an empty pod holder into the brewer. Be sure the holder
	is locked into place, and set the VOLUME CONTROL SLIDE
	LEVER to the maximum position.
3)	Place an empty container or bowl on the drip tray grate that	P2906
	will hold at least 414 ml (14 oz.) of liquid, and press the
	COFFEE BREW BUTTON to start a brew cycle.
4)	Once the brew cycle has finished, empty the container and
	set it back onto the drip tray grate. Press the COFFEE BREW
	BUTTON again to start a second brew cycle.
5)	Once the brew cycle has finished, empty the container and
	the remaining solution, or vinegar from the reservoir. Remove
	the Pod Holder; clean the reservoir and pod holder thoroughly	P2907
	using a mild detergent, then rinse.
NOTE: There is now descaling solution in the internal tank. Follow
the manufacturer’s directions if the solution must be left in the tank
for any period of time. For vinegar, allow the solution to sit for at
least two, but no more that four hours.
6)	Fill the reservoir to the maximum line with fresh clean cold
7)	water and place the pod holder back into the brewer.	P2908
	Place the empty container back onto the drip tray grate and

press the COFFEE BREW BUTTON to begin a brew cycle.

15