DEFINITIONS

COMPONENTS

•WATER RESERVOIR - Holds reserve water for brewing. The reservoir can be removed and filled separately at a sink or other clean water source or by pouring water through the slide lid. (Holds 46 oz. (1.7 L) to the maximum line.)

•SLIDE LID - The slide lid allows access to the reservoir. Water can be poured through the opened lid and into the reservoir without removing the reservoir.

•POD HOLDER RELEASE BUTTON - Push to unlock and release the pod holder. When there is power to the brewer, this button will illuminate red in color, showing the trademark BUNN name. This light will go out during a brew cycle and when the brewer has gone into Sleep Mode. (Refer to the “Features” section on page 8 for more information.)

•BLUE (BREW) LIGHTS - Blue colored lights are located near the pod holder area and light up to indicate that a brew cycle is in process.

•SPRAYHEAD SEAL - The seal keeps water under pressure from escaping, while a brew cycle is in process. If leaks are present during a brew cycle, consult the “Troubleshooting” section on page 16.

•SPRAYHEAD - Designed to distribute water evenly across the coffee pod or tea bag/pod to extract the proper flavor.

•POD HOLDER INSERT - A color-coded, removable screen designed to allow proper flow rates and steeping capabilities for the type of brew desired.

•POD HOLDER - Holds the coffee pod or tea bag/pod.

•DRIP TRAY GRATE - A removable part that allows any spilled liquid to drip through into the drip tray.

•DRIP TRAY - Removable tray that is designed to catch any spilled liquid.

•POWER SWITCH - Turns on and off all electrical service to the brewer. This button is only to be used when the brewer will not be used for several days. (In the “I” position the power is on. In the “O” position the power is off.)

•VOLUME CONTROL SLIDE LEVER - Adjusts the amount of water dispensed through the pod holder. Sliding it left will produce a smaller serving. Sliding it to the right will produce a larger serving. The brewer will dispense approximately 4 to 12 oz. (118 to 355 ml) in one ounce (30 ml) increments.

•CONTROL PANEL - Controls for brewing coffee or tea and various indicators are located on the control panel. (FIG. 2) See specific definitions below.

CONTROL PANEL

•COFFEE BREW BUTTON - Depress this button to brew a serving of coffee. Pressing it again will cancel a brew cycle in process.

•REFILL WATER INDICATOR - If the water in the reservoir is running low, and either the Coffee or Tea Brew button is pressed, this indicator will flash for a few seconds to show that the water reservoir needs to be refilled. A brew cycle cannot be started until the reservoir has been refilled.

•HEATING INDICATOR - This light indicates that the heater is bringing water up to temperature. A brew cycle cannot be started until the indicator has gone out. (During a brew cycle, this light will come on indicating the tank heater is warming the new water entering the tank.)

7

Page 6 Page 8
Page 7
Image 7
Bunn P2896 warranty Definitions, Components
Page 6 Page 8

P2896 specifications

The Bunn P2896 is a highly regarded commercial coffee brewer designed to meet the demands of busy cafés, restaurants, and offices. This unit is known for its ability to deliver high-quality coffee quickly and consistently, making it a preferred choice for those who value efficiency without compromising on taste.

One of the standout features of the Bunn P2896 is its dual thermal carafes, which allow for brewing and serving coffee simultaneously. This design ensures that hot coffee is always available, catering to high demand periods without the need for extensive wait times. Each carafe can hold approximately 1.9 liters, offering ample capacity for gatherings and busy service hours.

The P2896 utilizes advanced brewing technology that includes a unique pre-infusion system. This feature allows the coffee grounds to bloom before the full brewing cycle begins, ensuring optimal extraction and enhancing flavor profiles. This step helps in producing a more aromatic and richly flavored coffee, appealing to discerning coffee drinkers.

Temperature control is another crucial aspect of the Bunn P2896. It is equipped with a powerful heating element that maintains water at the ideal brewing temperature between 200°F to 205°F. This precision ensures consistent results every time and helps in preserving the integral qualities of the coffee being brewed.

Ease of use is also a major characteristic of the Bunn P2896. The brewer is designed with user-friendly controls that allow staff to operate it with minimal training. The streamlined interface and clear indicators simplify the brewing process, making it accessible for even the busiest environments.

Moreover, the Bunn P2896 is built with durability in mind. Its robust construction ensures long-term reliability, capable of withstanding the rigors of continual use in high-traffic locations. The stainless-steel finish not only adds to its aesthetic appeal but also ensures that it is easy to maintain and clean.

In summary, the Bunn P2896 stands out for its dual carafe system, advanced brewing technology, precise temperature control, user-friendly design, and durable construction. These features combine to make it a top choice for any business looking to serve exceptional coffee efficiently.
Top Page Image Contents