View of Cable end
Eyebolt
Cable
Screw
Spacer
Bracke
Fixing Cable

Fixing - The appliance should be secured to the wall using the fixing brackets on the flange of the appliance. If it is to be mounted above the ground, care should be taken to ensure the wall is able to take the weight of the appliance and that the fixings are of the correct type. Use all 6 screw holes in the brackets to attach to the wall.

If the appliance is hearth mounted the fixing is intended to prevent the appliance from moving / toppling and it

is permissible just to use 2 holes in the wall brackets or to drill through the appliance base and screw it to the floor.

Alternatively, hearth mounted appliances can use the cable fixing method by fixing eyebolts to the wall or

fireplace behind and pulling it back into place. See diagram

Do not fix the appliance directly to plasterboard as prolonged exposure to heat could affect it or the vapour layer behind. A layer of heat resistant board should be screwed to the wall instead. Fully purge pipes of air and any debris and connect the gas supply to the 8mm elbow on the fire. Leak test the supply using an approved method. Note: An isolating valve must be situated near the

appliance

for

servicing.

Site the thermostat at a suitable position where it will sense the room temperature.

 

The case can be test fitted to the chassis to ensure clearance. The gap in the case top between grille and spacer slides over the top flange on the appliance. The bottom of the case has folded out brackets that slide over cut outs in the appliance chassis.

The door on the appliance is secured with a magnet and it may be necessary to adjust the strength of the magnets grip. This can be done by bending the magnet holding bracket in or out to adjust.

Remove case and place to one side.

6.0 CLEARANCES TO COMBUSTIBLE MATERIALS AND SHELVES (See also 3.6)

Anon combustible shelf may be fitted to within 100mm of the top edge of the fire frame. Note that shelves will get hot and delicate ornaments, wax candles etc should be kept away from hot surfaces.

The wood of the fire surrounds may be fitted to within 100mm of the sides of the firebox provided

it

protrudes

no

further

forward

than

100mm.

Any combustible side walls must be at least 500mm from the fire bed.

 

 

Maximum depth of shelf

 

100mm

150mm

 

200mm

Minimum distance from

 

250mm

300mm

 

350mm

top of frame to underside of shelf .

As with all heaters the possibility of convection staining on surfaces in the vicinity of the heater shall be considered and the user advised. Particular attention should taken to ensure soft furnishings such as scatter rugs and curtains are kept at least 1 metre from the appliance.

- 7 -

Page 6 Page 8
Page 7
Image 7
Burley G4237/8 warranty Servicing
Page 6 Page 8

G4237/8 specifications

The Burley G4237/8 is a remarkable addition to the line of high-performance bicycles designed for both seasoned cyclists and casual riders alike. Known for its engineering excellence and attention to detail, the G4237/8 combines innovative technologies with a sleek design to enhance the cycling experience.

One of the standout features of the Burley G4237/8 is its lightweight frame, crafted from high-grade aluminum alloy. This material not only adds durability but also ensures that the bike remains easy to handle and maneuver, making it a perfect choice for various terrains. The frame geometry is designed for comfort, providing an upright riding position that reduces strain during long rides and makes it suitable for both city commuting and off-road adventures.

The G4237/8 is equipped with advanced suspension technology, improving shock absorption and ride quality. Whether tackling rocky paths or navigating through city streets, the bike maintains stability and control, providing a smooth experience. Additionally, the suspension system is adjustable, allowing the rider to personalize the bike's response based on their preferences or riding conditions.

Another attractive feature is the bicycle's integrated braking system. The Burley G4237/8 utilizes hydraulic disc brakes, known for their reliability and consistent performance, regardless of weather conditions. This means that riders can expect precise stopping power, enhancing safety during descents or in emergency situations.

The Burley G4237/8 is also outfitted with a user-friendly gear system that simplifies shifting. The gear ratios provide a broad spectrum of options, making it easy to tackle diverse landscapes effortlessly. Riders can transition smoothly from steep inclines to flat roads without losing momentum.

In terms of aesthetics, the Burley G4237/8 does not compromise. The bike features a modern design with a selection of vivid color options, ensuring that riders not only enjoy performance but also look stylish while doing so.

Overall, the Burley G4237/8 stands out due to its combination of lightweight construction, innovative suspension, reliable braking technology, and user-friendly gear options. This bike is designed to meet the needs of a wide range of cyclists, offering the perfect blend of comfort, safety, and style, making it an outstanding choice for anyone seeking an exceptional riding experience.
Top Page Image Contents