Burley LE Tiger d'lite Using Parking Brake, Installing and Operating Tow Bar, Installing Cover

Using Parking Brake

Engage parking brake by pushing handle, at bottom rear of trailer, to the right. Photo 4 Disengage by moving parking brake to the left.

Photo 4

Installing and Operating Tow Bar

1.Slide tow bar through both tow bar mounts on the LEFT side.

2.Line up BACK tow bar hole with rear tow bar mount hole.

3.Insert retaining pin through rear holes, and close spring clip securely. Figure 6

WARNING

NEVER OPERATE TRAILER WITHOUT RETAINING PIN LOCKED IN PLACE. AN UNLOCKED TOW BAR CAN LOOSEN OR DETACH, CAUSING ACCIDENT RESULTING IN SERIOUS INJURY.

Installing Cover

Slip D-rings over hooked corners of front tow bar mounts and attach buckle sections below side windows. To stow front window, unzip, roll up and insert loop fastener ends on elastic straps into hook fastener holders. Adjust sunshade as needed.

Attaching Handle

Slide handle into lower handle bar receivers and tighten knobs.

To change height position, flip handle over. Photo 5

Installing Safety Flag

Tiger d’lite:

Slip lower end of pole through opening in Tiger d’lite tail seam and out through the tail bottom.

All:

Insert flag pole into hole in top of LEFT handle bar receiver. Photo 6

IMPORTANT:

DO NOT USE TRAILER WITHOUT SAFETY FLAG.

 B U R L E Y C H I L D T R A I L E R O W N E R ’ S I N S T R U C T I O N A N D S A F E T Y M A N U A L