Double passenger tr ailers, one infan t:
Install Baby Snuggler in center of trailer, using the two center shoulder straps and center crotch
strap. figure b Follow steps 1-7.
Double passenger tr ailers, one infan t, one chilD:
Install Baby Snuggler on one side of trailer, using shoulder straps and crotch strap on that side.
Follow steps 1-7, positioning infant and making Baby Snuggler adjustments before placing child
in trailer seat.
Double passenger tr ailers, two inf ants:
Install Baby Snugglers using both shoulder harnesses and two outer crotch straps.
Follow steps 1-7.
for trailers wi th reclining seat f eature:
For added comfort, make the following adjustments to your trailer:
1. Loosen tension on the upper and lower straps behin d the trailer seat.
2. Place Baby Snuggl er in trailer, with Baby Snuggler bottom toward t he front of the trailer
seat. Lengthen crotch strap. figu re c
3. Follow steps 1-7.
Consult your Burley trailer manual for more information about the reclining seat feature.
If you do not have a copy of your trailer instruction manual, do not use the Burley Baby Snuggler.
To replace your manual, go to http://burley.com/support/manuals_current.cfm.
ALWAYS SECURE CHILDREN W ITH HARNE SS AND LAP BELT BE FORE USE. SECU RE ACCORDING TO I NSTRUCTIO NS ON TRAILER S EAT
LABEL AND IN OWNER’ S MANUAL. CO NSULT A PEDIATRIC AN BEFORE USIN G THIS PRODUCT. NE VER LEAVE A CHI LD UNOBSERV ED OR
UNATTENDED. FAILU RE TO DO SO COULD RE SULT IN AN ACCIDEN T AND SERIOUS IN JURY OR DEATH.
WARNING
For use while strolling and jogging ONLY.
DO NOT USE WHILE CYCLING OR SKIING.
Recommended age: 3 to 12 months
Approximate height: 25”-30” (63-76cm)
Weight: 15-21 lbs. (7-10kg)
Note: The Burley Baby Snuggler ca n be used
in any Burley child trailer with the strol ler/jogger
option and the 5-point harness syst em (2003 and
later), but works best on those models wi th seat
pad attachment strips on the child se at. For more
information, consult your Authorized
Burley Dealer or visit www.burley.com.

Installation

solo trailer, on e infant:
1. Remove existing shoulder harness pad and
seat pad. Insert shoulder straps through
openings in Baby Snuggler back. Use the
lower strap openings for a shorter infant,
and the upper openings for a longer
infant. figure a
2. Insert crotch strap through opening in Baby
Snuggler bottom. figure a
3. Slide padded tubes onto shoulder straps,
with straps oriented so that FLAT parts of
male buckles face each other. figure a
4. Position infant in Baby Snuggler, with infant’s
lower back centered on the Snuggler’s
lumbar support.
5. Snap male buckles i nto Y-buckle, with
Y-buckle positioned at infant’s sternum.
Adjust straps so infant cannot move too far
forward in Snuggler. figure a
6. To secure head and shoulders, adjust
side tension cords and toggles. The upper
Snuggler will narrow, cradling the infant’s
head. To change angle of infant’s legs, adjust
side straps. figure c
7. Fasten and a djust lap belt snugly below the
Y-buckle, making sure infant is comfortable
and able to breathe
normally. figure b

Baby Snuggler

Installation Instructions

SINGLE PASSENGER MU ST BE SEATED IN CEN TER POSITIO N.
IMPORTANT:
STRAPS BEHIND CHI LD SEAT MUST ALWAYS B E SECURED WHEN T RAILER IS IN U SE.
IMPORTANT:
figure a: Baby Snugg ler Installa tion
figure b: Baby Snuggl er Installa tion in d’lite Tra iler
figure c: Baby Snugg ler in Reclining Po sition
seat
belt
1. for longer
infant 1. for shorter
infant
3. strap
tubes
2. crotch
strap
adjustable
side tension
cord
adjustable
seat crotch
strap
adjustable
side strap
trailer
front
seat belt
snugly
fastened