Chromatherapy Light Kit
Installation and operation Instructions
The Jacuzzi Chromatherapy Lamp provides beautiful and practical illumination to your bath. It includes vivid rotating colors or penetrating white lighting to enhance your Jacuzzi experience, and is built to give years of service and pleasure.
The Lamp can be installed on most Jacuzzi baths or on any bath having sufficient flat space on the bath shell. The basic kit consists of an electrical control box and one Chromatherapy Lamp, with all necessary modular cables. The control box can support up to four lamps. An additional lamp kit is available and provides one lamp and one cable.
The installation requires drilling a hole in the bath shell for the control panel and each lamp. The Installation and Operation Instructions will provide all the information required for planning the installation, completing the installation, and complete operation of the equipment. The control box must be installed meeting applicable local building and electrical codes on a stud beam or wall.
CONTENTS |
|
|
Basic Lamp Kit |
| 1 |
Planning Installation |
| 1 |
Control Panel |
| 2 |
Chromatherapy Lamp | . | 2 |
Mount the Control Box |
| 3 |
Drill the Holes |
| 3 |
Drill Hole for Control Panel | . | 3 |
Drill Hole for Lamp(s) | . | 3 |
Install Panel and Lamp(s) |
| 4 |
Mount Control Panel |
| 4 |
Mount Chromatherapy Lamp(s) | . | 4 |
Leak Test |
| 5 |
Operate Chromatherapy Lighting |
| 5 |
Use Chromatherapy Lighting |
| 5 |
Control Chromatherapy Lighting |
| 5 |
Control Color Lighting |
| 5 |
Control White Lighting |
| 5 |
Basic lamp KitS
GD56000 Complete kit
One control box for wall mounting
One control panel and one control cable
GQ88000 Accessory lamp kit
One lamp and one lamp cable
To add an additional lamp, up to four total, order the accessory lamp kit. It includes one lamp and one lamp cable. Each lamp is mounted in the same manner, and is connected to the control box as described. To order additional lamps, please contact your Jacuzzi dealer or agent.
IMPORTANT: Read the instructions before beginning the installation.
Copyright © 2008 by Jacuzzi Whirlpool Bath Products
PLANNING INSTALLATION
It is necessary to plan the location of the control box, control panel, and each lamp before drilling any holes. A possible configuration of the Chromatherapy equipment is shown in Figure 1.
First, consider the location requirements for the control panel and lamp(s), see Figure 2. The control panel cannot be immersed
in the bath water. Therefore it must be positioned at least one inch above the level of the overflow drain. On the other hand, the lamp(s) must be positioned a minimum of 4 inches below the normal water line.
Control panel
Lamp 1
Lamp 2
Figure 1. Possible configuation for Chromatherapy assembly
Top rim of bath
Hole for control panel
1 inch
Overflow drain
Normal water line
4 inches (minimum)
Hole for lamp(s)
Floor of bath
Figure 2. Locate the Holes for Control Panel and Lens(es)
GQ99000 •