3.Remove any and all burrs or roughness from the inside of the hole.

Clean away all debris and tools from the area. Use a moist cotton cloth to wipe the inside and shelf of the bath rim.

INSTALL PANEL AND LAMP(S)

Install the control panel and each lamp as described below.

Mount Control Panel

The hole for the control panel has a notch to ensure proper mounting alignment of the control panel on the bath, see Figure 6.

1.Apply clear silicone to the back side of the control panel and insert the panel into place.

CAUTION: Do not permit silicone to enter the plug area at the back of the panel. Failure to comply may result in damage to the equipment.

2.Press the panel fast against the inside surface of the bath.

Make sure the panel is pressed completely against the shell.

3.Remove excess silicone from around the control panel.

4.Alow the silicone to cure to ten to fifteen minutes undisturbed.

5.Attach the control cable from the control panel to the control box, see Figure 7. The proper plug for the control panel is shown in Figure 5.

Mount Chromatherapy Lamp(s)

The hole is ready to mount the lamp(s), see Figure 8.

1.Remove the retainer nut from the lamp assembly.

2.Apply clear silicone around the back of the edge of the lamp.

CAUTION: Do not permit silicone to enter the plug area at the back of the lamp. Failure to comply may result in damage to the equipment.

3.Insert the lamp housing through the hole in the bath shell so that the edge of the lamp housing is tightly against the inside surface of the bath. Make sure the lamp is pressed completely against the shell to prevent leakage.

4.From the outside of the bath shell, screw the retainer nut over the threaded body, as shown in the figure. Hand- tighten the retainer nut onto the lens threads. Do not permit the lamp to rotate while tightening the retainer nut.

5.Remove any excess silicone from around the lamp.

6.Allow the silicone to cure for ten to fifteen minutes.

7.Attach the light cable from the back of the lamp to the control box see Figure 7. The proper plug for the lamp(s) is shown in Figure 5.

NOTE: There are four plugs for up to four lamp cables. Any of the four plugs can be used for proper operation. Jacuzzi recommends that you start with the left-most plug, closest to the control box cable plug to attach each lamp.

Apply silicone

 

behind panel

 

 

Modular

 

cable

Control

Hole for control panel

panel

(see detail below)

 

Figure 6. Mount the Control Panel

Bath shell (Outisde of bath)

Chromatherapy lamp or control panel (Inside of bath)

Plug from control panel or lamp

Figure 7. Attach plug to Chromatherapy device

Apply silicone

Hole,

Retainer

behind panel

1-1/16”

nut

Inside surface

Lampof bath shell assembly

Figure 8. Hole for Chromatherapy Lamp(s)

Jacuzzi© Chromatherapy: Installation and Operation

Page  of 5

GQ99000 • 07-08

Page 3 Page 5
Page 4
Image 4
Jacuzzi GQ99000 manual Install Panel and Lamps, Mount Control Panel, Mount Chromatherapy Lamps
Page 3 Page 5

GQ99000 specifications

The Jacuzzi GQ99000 is a luxurious spa that combines modern design with advanced technologies for an unparalleled relaxation experience. This hot tub is perfect for those who want to unwind after a long day or enjoy quality time with family and friends.

One of the standout features of the GQ99000 is its spacious design, accommodating up to six people comfortably. The ergonomic seating arrangement ensures that every bather experiences maximum comfort. The strategically placed jets provide a therapeutic massage experience, targeting specific muscle groups to relieve tension and stress.

The GQ99000 is equipped with a state-of-the-art hydrotherapy system that utilizes adjustable jets for a customizable massage experience. Users can easily control the intensity and direction of the jets to focus on sore areas, promoting relaxation and recovery. This system is complemented by a built-in heater that maintains the water temperature, allowing users to enjoy their spa experience at a consistent and comfortable level.

In terms of technology, the Jacuzzi GQ99000 features a user-friendly digital control panel that provides easy access to all functions. This allows users to adjust the temperature, control the jet settings, and even set timers for automatic shut-off. The system is designed for convenient operation, making it suitable for both experienced spa users and beginners.

Energy efficiency is another key characteristic of the GQ99000. The spa is designed with high-quality insulation and efficient heaters that minimize energy consumption, making it an eco-friendly option for those conscious of their environmental impact. This energy-efficient design ensures that the spa remains cost-effective in the long run.

The GQ99000 also boasts a stunning aesthetic appeal. With its sleek lines and modern finish, it easily complements any outdoor setting. The spa is available in various color options to match the user’s personal style. Additionally, it features integrated LED lighting, creating a wonderful ambiance for nighttime use.

Overall, the Jacuzzi GQ99000 is a perfect blend of comfort, technology, and aesthetic appeal. With its spacious seating, customizable hydrotherapy options, user-friendly controls, energy efficiency, and beautiful design, it stands out as an excellent choice for anyone looking to elevate their outdoor relaxation experience. Whether for personal enjoyment or social gatherings, the GQ99000 promises to deliver both luxury and therapeutic benefits.
Top Page Image Contents