WARNING:

Unplug immediately if there is something wrong with your projector.

Do not operate if smoke, strange noise or odor comes out of your projector. It may cause fire or electric shock. In this case, unplug immediately and contact your dealer.

Never remove the cabinet.

This projector contains high voltage circuitry. An inadvertent contact may result in an electric shock. Except as specifically explained in User Manual, do not attempt to service this product by yourself. Please contact your dealer when you want to fix, adjust, or inspect the projector.

Do not modify the projector.

It can lead to fire or electric shock.

Do not keep using the damaged projector.

If the projector is dropped and the cabinet is damaged, unplug the projector and contact your dealer for inspection. It may lead to fire if you keep using the damaged projector.

Do not face the projection lens to the sun.

It can lead to fire.

Use correct voltage.

If you use incorrect voltage, it can lead to fire.

Do not place the projector on uneven surface.

Place the projector on a level and stable surface only.

Do not look into the lens when the projector is operat- ing.

It may hurt your eyes. Never let children look into the lens when the projector is on.

Do not unplug the power cord during operation.

It can lead to lamp breakage, fire, electric shock or other trouble. Wait for the fan to stop before unplugging the power cord.

Do not touch the air outlet grilles and bottom plate.

Do not touch them or put other equipment close to the air outlet grilles because they become hot during operation. The heated air outlet grilles and bottom plate may cause injury or damage to other equipment. Also, do not put the projector on a desk that is easily affected by heat.

Do not look into the air outlet grilles when projector is operating.

Heat, dust, etc. may blow out of them and hurt your eyes.

Do not block the air inlet and outlet grilles.

If they are blocked, heat may be generated inside the projector, caus- ing deterioration in the projector quality and fire.

Do not use flammable solvents (benzene, thinner, etc.) and flammable aerosols near the projector.

Flammable substances may ignite causing fire or breakdown because the temperature inside the projector rises very high while the lamp is illuminating.

Place of installation

For safety’s sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as specified below.

•Operating temperature: between +41°F (+5°C) and +95°F (+35°C)

•Operating humidity: between 30% and 90%

•Never put any heat-producing device under the projector to pre- vent the projector from being overheated.

•Do not install the projector at a place that is unstable or subject to vibration.

•Do not install the projector near any equipment that produces a strong magnetic field. Also refrain from installing the projector near any cable carrying a large amount of current.

•Place the projector on a solid, vibration-free surface. Otherwise it may fall, causing serious injury or damage.

•Do not stand the projector on its end. It may fall, causing serious injury or damage.

•Slanting the projector more than ±10° (right and left) or ±15° (front and rear) may cause trouble or explosion of the lamp.

•Do not place the projector near air-conditioning unit or heater to avoid the air outlet and inlet grilles from being exposed to hot air.

ENGLISH

COMPLIANCE NOTICE OF FCC

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment gen- erates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm- ful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

•Reorient or relocate the receiving antenna.

•Increase the separation between the equipment and receiver.

•Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

•Consult the dealer or an experienced Radio / TV technician for help.

Changes or modifications not expressly approved by Mitsubishi could void the user’s authority to operate this equipment.

COMPLIANCE NOTICE OF INDUSTRY CANADA

This Class B digital apparatus complies with Canadian ICES-003.

EN-5

Page 4 Page 6
Page 5
Image 5
Mitsubishi Electronics SD206U user manual Never remove the cabinet Do not modify the projector, Use correct voltage
Page 4 Page 6

SD206U specifications

The Mitsubishi Electronics SD206U is a versatile and powerful projector designed to meet the demanding needs of corporate presentations, educational environments, and various other settings where high-quality visuals are essential. Renowned for its compact design and advanced features, the SD206U ensures that users can deliver impactful presentations with ease.

One of the standout features of the SD206U is its impressive brightness level, reaching up to 3,200 ANSI lumens. This high brightness capability ensures that visuals remain clear and vibrant even in well-lit rooms, making it suitable for various lighting conditions. Coupled with a high contrast ratio, the projector achieves deep blacks and bright whites, enhancing image quality for both video and presentations.

The projector utilizes DLP (Digital Light Processing) technology, known for its reliability and sharp image reproduction. This technology minimizes color distortion and provides excellent color accuracy, ensuring that images appear true to life. The SD206U supports a resolution of XGA (1024 x 768), making it effective for displaying detailed graphics, charts, and text.

Another significant aspect of the SD206U is its connectivity options. It is equipped with multiple input ports including HDMI, VGA, and composite video, allowing users to easily connect various devices such as laptops, Blu-ray players, and gaming consoles. This wide range of connectivity ensures compatibility with different media sources, accommodating the diverse needs of users.

In addition to its impressive visual capabilities, the SD206U features a long-lasting lamp life of approximately 5,500 hours in normal mode, extending to 10,000 hours in eco mode. This longevity reduces maintenance costs and enhances the usability of the projector over time. The projector also boasts a lightweight design, making it portable and easy to integrate into different environments.

The SD206U incorporates multimedia functionality, supporting various formats including JPEG for images and MPEG for video playback. This feature allows users to project media directly from USB drives, providing convenience without the need for additional hardware.

In summary, the Mitsubishi Electronics SD206U is a robust projector that excels in brightness, connectivity, and image quality. Its DLP technology, long lamp life, and user-friendly features make it an ideal choice for professionals and educators looking for a reliable solution for impactful presentations.
Top Page Image Contents