Basic operation (continued)

Power-off

Use the following procedure to turn off the projector.

1.Press the POWER button on the control panel or the OFF button on the remote control.

•The message "POWER OFF? YES : PRESS AGAIN" appears on the screen.

•To cancel, press any button except the POWER button. (Some buttons on the remote control don’t function for can- cel.)

2.Press the POWER button on the control panel or the OFF button on the remote control within 10 seconds again.

•The lamp will go out and the STATUS indicator will start blinking.

•Though the lamp goes out at this second press of the POWER button (or STANDBY button), the air outlet fans con- tinue operating for approx. 90 seconds to cool down the lamp. The STATUS indicator will stop blinking.

3.Unplug the power cord.

•The POWER indicator will go out.

•To light the lamp again, press the POWER button (or ON but- ton). If the lamp doesn’t light up immediately, repeat pressing the POWER button (or OFF button) two or three times. If it should still fail to light up, replace the lamp.

Notice:

•When storing the projector in the carrying case, the lens should face up.

Instant Shut Down

You can turn off this projector just by unplugging the power cord with- out pressing the POWER button.

•When Power-ON under the high temperature near the lamp after Instant Shut Down, the audio out and the cooling fan start firstly. Then the lamp will light up automatically about 90 seconds later after starting the cooling fan.

•Don't shut down the projector while the STATUS indicator is blink- ing after the lamp lights up because the lamp's life may be short- ened.

•Don't turn the projector back on right after shutting it down because the lamp's life may be shortened. (Wait about 10 minutes before turning the projector back on.)

•Before shutting down the projector, be sure to close the menu screen. If you shut down the projector without closing the menu, the setting data of the menu may not be saved.

•If you shut down the projector while controlling the projector using the network function, the application software may fail.

AUTO POSITION button

When the image isn’t projected in the right position with COMPUTER selected as the input source, follow the procedure below.

1.Project a bright image such as the "Recycle Bin" window on the full screen.

2.If the screen saver is running, turn it off.

3.Press the AUTO POSITION button.

•If the image is still not in the right position, adjust the image position using the SIGNAL menu. See page 19.

Volume from the speaker

Press the KEYSTONE button on the remote control to switch the KEY- STONE / VOLUME adjustment. When the VOLUME control bar appears on the screen, press the VOLUME + or -button to change the volume from the speaker.

The volume control bar will appear on the screen.

•The volume control bar will disappear about 10 seconds after the VOLUME button is released.

•When a high-level audio signal, such as a DVD audio signal, is supplied to the AUDIO IN terminal, the output from the speaker may be distorted.

AV mute

The video and audio signals are temporarily muted when the MUTE button is pressed. To cancel muting, press the MUTE button again.

ANAMORPHIC mode

When playing DVD discs containing data of letterboxed image, press the 16:9 button. Exit the ANAMORPHIC mode, by pressing the 16:9 button again.

Important:

•When a letterboxed image is kept displayed for a long time before displaying 4:3 image, the afterimages of the black bars may appear on the 4:3 image screen. Consult your dealer in this case.

Caution:

•After using the projector, wait 90 seconds for the air outlet fans to stop. Then unplug the power cord from the wall outlet.

•While cooling down, the STATUS LED keeps blinking green, the POWER button won’t work till it stops blinking.

•The air outlet fans will run for extra 90 seconds before starting the projector if it didn't shut down properly ( unplug directly without pressing POWER button) and the temperature is too high.

•The air outlet fans rotate faster as the temperature around the pro- jector rises.

•After shut down due to the high temperature, the Status LED is lit about 10 seconds.

Important:

•Do not display a still picture for a long time because the afterim- ages may persist on the screen.

EN-14

Page 13 Page 15
Page 14
Image 14
Mitsubishi Electronics SD206U Power-off, Instant Shut Down, Auto Position button, Volume from the speaker, AV mute
Page 13 Page 15

SD206U specifications

The Mitsubishi Electronics SD206U is a versatile and powerful projector designed to meet the demanding needs of corporate presentations, educational environments, and various other settings where high-quality visuals are essential. Renowned for its compact design and advanced features, the SD206U ensures that users can deliver impactful presentations with ease.

One of the standout features of the SD206U is its impressive brightness level, reaching up to 3,200 ANSI lumens. This high brightness capability ensures that visuals remain clear and vibrant even in well-lit rooms, making it suitable for various lighting conditions. Coupled with a high contrast ratio, the projector achieves deep blacks and bright whites, enhancing image quality for both video and presentations.

The projector utilizes DLP (Digital Light Processing) technology, known for its reliability and sharp image reproduction. This technology minimizes color distortion and provides excellent color accuracy, ensuring that images appear true to life. The SD206U supports a resolution of XGA (1024 x 768), making it effective for displaying detailed graphics, charts, and text.

Another significant aspect of the SD206U is its connectivity options. It is equipped with multiple input ports including HDMI, VGA, and composite video, allowing users to easily connect various devices such as laptops, Blu-ray players, and gaming consoles. This wide range of connectivity ensures compatibility with different media sources, accommodating the diverse needs of users.

In addition to its impressive visual capabilities, the SD206U features a long-lasting lamp life of approximately 5,500 hours in normal mode, extending to 10,000 hours in eco mode. This longevity reduces maintenance costs and enhances the usability of the projector over time. The projector also boasts a lightweight design, making it portable and easy to integrate into different environments.

The SD206U incorporates multimedia functionality, supporting various formats including JPEG for images and MPEG for video playback. This feature allows users to project media directly from USB drives, providing convenience without the need for additional hardware.

In summary, the Mitsubishi Electronics SD206U is a robust projector that excels in brightness, connectivity, and image quality. Its DLP technology, long lamp life, and user-friendly features make it an ideal choice for professionals and educators looking for a reliable solution for impactful presentations.
Top Page Image Contents