d.Remove the ignition electrode and inspect it for oxides. Clean the oxides off the electrode with sandpaper. Inspect the ceramic insulator for cracks and replace the ignitor assembly if necessary.
e.Remove the fan/gas valve assembly from the burner hood. Inspect for lint and dust. If significant lint and dust are found, disassemble the fan/gas valve assembly to expose the swirlplate and fan inlet (see the exploded diagram in the parts list at the back of this manual). Vacuum these parts as required, being careful not to damage the vanes on the swirlplate.
f.Remove the burner hood to access the burner and the combustion chamber.
g001 Tc 0 Tw (59)Tj /eo6mbu6nyant lid. Inspeve assembly froth sandpapf Tc 0 Tw (59showsand dan t deteriorad thed. (. Inspec
59