Bush Hog 2297 manual Assembly, Installing Quick Attach Device

ASSEMBLY

ASSEMBLY

Installing Quick Attach Device

Always use a drift and hammer made of non-sparking material (a shot-filled mallet is recommended) to install or remove pins. A steel hammer or drift could generate flying metal fragments and result in injury. Always wear safety glasses when using a hammer to remove or install pins.

1.Fasten quick attach device to lower boom arms and bucket tilt cylinders using 1” x 4-3/8” anti-rotation pins, 3/8” x 3/4” shoulder bolts, and 3/8” lock nuts (supplied with loader). Figure Asm-L-0014.

2.Attach bucket leveling rod indicator (supplied with loader), to outside of right ear on quick attach as shown. Figure Asm-L-0014.Secure bucket leveling rod indicator with two 1/8” x 1” cotter pins (supplied with loader).

2297 01/11 Assembly Section 3-8

© 2011 Alamo Group Inc.