PROBLEM | POSSIBLE CAUSE | REMEDY |
|
|
|
Insufficient lift capacity | Load is greater than boom | Check loader specifications. |
| lift capacity. |
|
| Improper hydraulic pump | Repair or replace pump. |
| operation. |
|
| Internal lift cylinder leakage. | Replace any worn parts and install |
|
| a seal repair kit. See “Cylinder |
|
| Service”. |
| Improper hydraulic valve | Repair or replace valve. |
| operation. |
|
Excessive wear on bucket | Bucket is riding on cutting |
cutting edge | edge instead of wear runners. |
Use boom “FLOAT” position or bucket level indicator to ensure bucket rides
Bucket cutting edge not | Rear axle on tractor not level |
flat on theground. | from side to side |
With tractor on level surface, compare rear axle height from left to right, measuring from axle center toground. Adjust air pressure in rear tires until axle height measures the same for both sides.
