OPERATION
OPERATION
It is important to keep the bucket level when approaching a bank or pile. This will help prevent gouging the work area.
PEELING AND SCRAPING
Use a slight bucket angle, travel forward and hold lift control forward to start the cut. Make a short 5 to 8 foot angle cut and break out cleanly.
With bucket level, start a cut at notch approximately 2 inches deep. Hold depth by feathering bucket control to adjust cutting lip up or down. When front tires enter the notch, adjust lift cylinder to maintain proper depth.
2545 01/11 | Operation Section |
© 2011 Alamo Group Inc.
