![](/images/new-backgrounds/1175309/175309171x1.webp)
OPERATION
OPERATION
PROBLEM | POSSIBLE CAUSE | REMEDY |
|
|
|
Insufficient lift capacity | Load is greater than boom | Check loader specifications. |
| lift capacity. |
|
| Improper hydraulic pump | Repair or replace pump. |
| operation. |
|
| Internal lift cylinder leakage. | Replace any worn parts and install |
|
| a seal repair kit. See “Cylinder |
|
| Service”. |
| Improper hydraulic valve | Repair or replace valve. |
| operation. |
|
|
|
|
Excessive wear on bucket | Bucket is riding on cutting | Use boom “FLOAT” position or |
cutting edge | edge instead of wear runners. | bucket level indicator to ensure |
|
| bucket rides |
|
|
|
Bucket cutting edge not | Rear axle on tractor not level | With tractor on level surface, |
flat on theground. | from side to side | compare rear axle height from left to |
|
| right, measuring from axle center |
|
| toground. Adjust air pressure in rear |
|
| tires until axle height measures the |
|
| same for both sides. |
2545 01/11 | Operation Section |
© 2011 Alamo Group Inc.