![](/images/new-backgrounds/1115558/11555811x1.webp)
IMPORTANT SAFETY PRECAUTIONS
This symbol is used to call attention to safe- ty precautions that should be followed by the operator to avoid accidents. When you see this symbol, carefully read the message that follows and heed its advice. Failure to comply with safety precautions could result in serious bodily injury.
In addition to the design and configuration of equipment, hazard control and accident prevention are depen- dent upon the awareness, concern, prudence and proper training of personnel in the operation, transport, maintenance and storage of equipment. Lack of attention to safety can result in accident, personal injury, reduction of efficiency and worst of
1.Read the Operator’s Manual. Failure to read the Operator’s Manual is considered a misuse of this equipment.
2.Become familiar with all the machine’s controls and all the caution, warning and danger decals affixed to the machine before attempting to start or operate.
3.Before starting or operating the machine, make a walk around inspection and check for obvious defects such as loose mounting bolts and damaged components. Correct any deficiency before starting.
4.Do not allow children to operate the cutter. Do not allow adults to operate it without proper instruction.
5.Do not carry passengers.
6.Keep the area of operation clear of all persons, particularly small children and pets. The operator should cease mowing whenever anyone comes within the operating area.
7.Clear the work area of objects which might be picked up and thrown.
8.Use a piece of cardboard or wood rather than hands to search for hydraulic leaks. Escaping hydraulic oil under pressure can penetrate skin. If fluid is injected into the skin, it must be surgically removed within a few hours by a doctor familiar with this form of injury or gangrene may result.
9.Do not operate without all guards and shields in place and in good condition.
10.Lower implement to ground, stop tractor engine, apply parking brake, and allow blades to completely stop before leaving the tractor.
11.Keep hands and feet away from blades.
12.This cutter is not to be operated along highways or in any area where people may be present unless all sides of the unit are enclosed by permanent bands, safety chains or other factory approved safety shields that are in good repair.
13.Wear personal protective equipment such as, but not limited to, protection for eyes, ears, feet, hands and head when operating or repairing the equipment. Do not wear loose clothing or jewelry that may catch on equipment moving parts.
14.When performing adjustments or maintenance on the cutter, first lower it to the ground or block it securely at a workable height.
15.Never stand between tractor and cutter while tractor is being backed to the cutter hitch.
16.Reduce speed when transporting cutter to avoid bouncing and momentary loss of steering.
17.Use tractor flashing warning lights, day or night, when transporting cutter on road or highways unless prohibited by law.
18.In the event that someone other than yourself will operate this equipment we firmly suggest that all SAFETY references be discussed prior to operation.
19.It is recommended that tractor be equipped with Rollover Protective System (ROPS) and seat belt be used in all mowing operations.
5