Bush Hog 865H, 665H, 765H manual Attaching KIT Instructions For 965H

Figure 21
				207													213
											207
(965H)
										217
													210			220
											221
																			216
				210
																210
																203
				208
			206
	205
												200
																						204
		210
				219
				210		209
												207
																203

207

218

210

210

202

		215
	214
212
	211

ATTACHING KIT INSTRUCTIONS (For 965H)

3-POINT HITCH LINKAGE & HYDRAULIC HOOK-UP

TO TRACTOR HYDRAULIC SYSTEMS

General Description

Mounting and hydraulic kits include two hoses which can be used in connecting the backhoe control valve to the tractor hydraulic system. Additional hydraulic components or kits will be required to complete the hook-up to the tractor hydraulic system. Refer to “Hydraulic Hook-Up” section for further information. Pump and reservoir kits are available as options.

The backhoe is mounted on the tractor lower link arms and an adjustable upper link is supplied to replace the tractor upper link. A set of stabilizer arms are included. They bolt from the adjustable upper

link to the backhoe mainframe, locking the hoe rigid- ly in one position.

IMPORTANT- Tractor lower links must be kept free of lifting forces at all times, after installation of the attaching kit, by keeping tractor quadrant lever in the lowered position.

IMPORTANT: If the 3-Point Kit is to be used with a PTO & Reservoir Kit, the Reservoir Tank and it’s fit- tings should be installed before proceeding with the 3-Point installation.

28