CONTROLS
OPERATOR INTERLOCK SYSTEM
Your Bush Hog Zero Turn Rider is equipped with an Operator Interlock System that is designed to help prevent possible serious injuries. Understanding and maintaining this system is vital for safe operation.
To Start Engine:
1.Blades (PTO) must be disengaged.
2.Control levers in neutral (swung out).
3.Parking brake on.
4.Operator in seat.
The Engine Will Kill If:
1.The operator leaves the seat with:
a.The control levers out of neutral (swung in).
b.The blades are engaged.
c.The parking brake is off.
d.All of the above.
2.The park brake is on before the control levers are in neutral (swung out).
DO NOT OPERATE MOWER IF SAFETY SWITCH- ES ARE NOT OPERATING PROPERLY.
WARNING
DO NOT OPERATE MACHINE UNLESS INTERLOCK SYSTEM FUNCTIONS PROP- ERLY. FAILURE TO HEED THIS WARNING MAY RESULT IN SERIOUS INJURY, DEATH OR EQUIPMENT DAMAGE.
TRACTOR SPECIFICATIONS
Width - (For 44” Deck) . . . . . . . . . . . . . . . . . . . . . . . . . 42” (For 52” Deck) . . . . . . . . . . . . . . . . . . . . . . . . . 44”
Height - To top of seat back (Standard Seat) . . . . . . . 44” (Suspension Seat) . . . . . 48”
Fuel Capacity (In Twin Tanks) . . . . . . . . . . . . . 6.5 gallons
Hydrostatic Transaxles - All Models. . . . . . . . . (2) Hydro- Gear
Engines - 17 hp Briggs & Stratton Intek
18 hp Briggs & Stratton Intek Twin
20 hp Kohler Command Twin
20 hp Honda GXV620 Twin
Tires - All Models - Front . . . . . . . . . . . . . . . . 11 x 4.0 - 5
Drive . . . . . . . . . . . . 18 x 8.5 - 8 (44”)
18 x 9.5 - 8 (52”)
CONTROL LOCATIONS
①Ignition Key - On right hand control console.
②Engine Throttle - On right hand control console.
③Two Steering/Speed Control Levers - In front of seat at side. (Shown on page 20)
④PTO Clutch Switch - On right hand control console.
⑤Parking Brake Lever - On left side of operator. (Shown on page 12)
⑥Blade Height Adjust Pin - Right side of deck. (Shown on page 11)
⑦Choke - On right hand control console.
⑧Hydrostatic Transaxle Bypass Valve - Right
hand and left hand sides at rear of unit. (Shown on page 12)
⑨Hour Meter/Service Minder - On right hand con- trol console.
➉Warning Light - On right hand control console for engine oil pressure.
②
①
➉
⑦
④
⑨
DECK SPECIFICATIONS
ITEM |
|
|
Cutting width | 44” | 52” |
Cutting Height | ||
Blades | 15” | 18” |
Overall width |
|
|
with chute down | 55” | 64” |
Material thickness - Deck | 10 | |
Spindle bearings | 25 |
9