Philips 200VW8FB service manual LCD specification, GAP definition, Panel Offset, Horizontal tilt

200VW8 LCD

63

3.LCD SPECIFICATION

3.1LCD specification

Panel	AUO	LPL	CPT
	M201EW02_V8	LM201WE3-TLH2	CLAA201WA04
Resolution	1680x1050 (WSXGA+)	1680x1050 (WSXGA+)	1680x1050 (WSXGA+)
Active area (HxV)	433.44mm x 270.90mm	511.133	433.44mm x 270.90mm
Outside	459.4 x 296.4 x 16.6 (mm)	459.4 x 296.4 x 16.5 (mm)	459.4 x 296.4 x 16.6 (mm)
dimensions(WxHxD)
Pitch (mm)	0.258 x 0.258	0.258 x 0.258	0.258 x 0.258
Display surface	Anti-Glare	Anti-Glare	Anti-Glare
Color depth	16.7M colors	16.7M colors	16.7M colors
Backlight	4 CCFL	4 CCFL	4 CCFL
Viewing angle	160 for H/V (Typ.)	160 for H/V (Typ.)	160 for H/V (Typ.)
Contrast ratio	1000:1 (Typ.); 800:1 (Min)	1000:1 (Typ.); 600:1 (Min)	1000:1 (Typ.); 600:1 (Min)
White luminance	300nit (Typ); 240nits (Min)	300nit (Typ); 250nits (Min)	300nit (Typ); 200nits (Min)
Color gamut	72%	72%	72%
Gate IC	Raydium (for 800) ; Toshiba	Philips	TBD
	(for 80A)
Source IC	Raydium (for 800) ; Novatec	Lusem	TBD
	(for 80A)
Response time	5ms	5ms	5ms

4COSMETICS APPEARANCE

4.1GAP definition

The gap between LCD and front bezel must be <= 1.0mm

4.2Panel Offset

Panel Offset: Panel disposition tolerance inside the front bezel must be <=1.0mm

4.3Horizontal tilt

Horizontal tilt between front bezel & LCD shall be <= 1.0mm

5.CONNECTORS

5.1Video Connection

The monitor is equipped with a 15 pin mini D-SUB connector.

5.2PIN Assignment

5.2.115 pin mini D-Sub connector

The PIN assignment of the 15 pin mini D-SUB connector / cable is as follows: