Advanced OSD Adjustment
200VW8 LCD
7
Advanced OSD Adjustment
1. Front control panel
2. To Lock/Unlock OSD function
The OSD function can be locked by pressing MENU button for more than 10 seconds, the screen shows following windows for 3 seconds.
Every time when you press any button, this message appears on the screen automatically.
ATTENTION
OSD MAIN CONTROLS LOCKED
Locked OSD function can be released by pressing MENU button for more than 10 seconds. While press MENU button for OSD unlocked purpose, the screen will keep showing OSD MAIN MENU LOCKED until OSD function unlocked and screen automatically shows following window for 3 seconds.
ATTENTION
OSD MAIN CONTROLS UNLOCKED
3. Access Factory Mode
To hold AUTO and POWER buttons, you can saw the LED light flashing at this time. Then release the AUTO button and Keep pressing the POWER button. The monitor will power on and LED light give out orange light. Press MENU to bring up OSD menu for confirmation as below:
200VW8
If this message appeared, means monitor already entered the factory mode.
4. Entering
If you access into factory mode, press < or > button to move the cursor on the message bar of “ HUSDON 200VW8 V.32.”. Then press MENU to confirm, OSD menu will convert into another format as below:
BIOS Revision Scaler IC Type Panel Type BIOS issued date
V.32 TSUMU58WHJ
| Burn in |
| Off |
|
|
|
|
| AutoColor |
|
|
|
|
|
|
| Con |
| 50 |
|
|
|
|
| Bri |
| 100 |
|
|
|
|
| Gain | R | 88 | G | 91 | B | 88 |
| Offset | R | 121 | G | 131 | B | 131 |
| sRGB | R | 97 | G | 98 | B | 82 |
| 9300K | R | 91 | G | 94 | B | 95 |
| 6500K | R | 97 | G | 98 | B | 82 |
Color Update
Fatory Reset
Move the cursor by MENU button, and press the < or > button to change the
Leave factory mode by simply power off the monitor.
Warning
*If you only want to enter burn in mode, please don’t change any other setting items as above listed.
*Unfortunately, if some settings has been changed by unknown reasons or wrong operation. Please refer to the chapter of “W/B Adjustment” to guide the operator how to restore the default settings or do adjustment.
Appendix:
Explanation of above listed selections.
Selection | Description | |
Burn in On/Off | Enter Aging Mode | |
Auto Color | Auto Color Adjustment | |
Con | Contrast Adjustment | |
Bri | Brightness Adjustment | |
Gain | ADC Gain Value Adjustment | |
(Auto adjustment by H/W when implement Auto Color function) | ||
| ||
Offset | ADC Offset Value Adjustment | |
(Auto adjustment by H/W when implement Auto Color function) | ||
| ||
sRGB | sRGB Color Temperature Gain Value Adjustment | |
9300K | 9300K Color Temperature Gain Value Adjustment | |
6500K | 6500K Color Temperature Gain Value Adjustment | |
Color Update | Save All of Color Temperature Gain Value | |
Factory Reset | Memory Recall to Factory Default Settings |
